Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

Tier1 Precision Series Whole House Chlorine Reduction System (1,100,000 Gallon Capacity)

Price $729.00
Availability: In Stock - Free Shipping
Certified to NSF/ANSI 42 for the reduction of Chlorine up to 1,100,000 gallons. Provide clean, great tasting water to every tap in your home with this ideal solution. Ideal for families with larger homes.
  • Certified to NSF/ANSI 42 for the reduction of Chlorine up to 1,100,000 gallons.
  • Provides clean, great tasting water to every tap in your home.
  • Exclusive NSF Certified electronic control valve.
  • Convenient package includes installation components for most consumers' needs.
See more product details
The Precision Series Tier1 Whole Home Backwashing Carbon Filter System is a whole home solution system designed for families of 1-6 people based on water usage and is perfect for average to large homes, and smaller commercial applications. As a point of entry system, the Precision Series delivers great tasting filtered water to every room in your home all from one centralized location. This system has a small floor space footprint and can be installed by the water feed line with little to no hassle. The carbon backwash tank has a service life of 5-7 years with one single, easy to install and operate tank. Manufactured to reduce chlorine taste, odor, rust, corrosion, sand, sediment, silt and turbidity, the Precision Series Tier1 Whole Home Backwashing Carbon Filter System has your home filtration needs covered. Tier1 is ready to protect every drop.

Tier1 Backwashing Carbon Filter System

Service Flow Rate: 7 gallons per minute (gpm)
Mineral Tank Dimensions: 10" x 54" (without control valve)
Mineral Tank Dimensions: 10" x 58-1/2" (with control valve)
Mineral Tank Media: Granular Activated Carbon
Fitting Connections: Comes with 3/4 inch and 1 inch fittings

What is Chlorine?

Chlorine is a primary disinfection treatment solution used by municipal water companies to deactivate and reduce bacteria in water. While helpful for killing bacteria, chlorine has also been know to cause unpleasant tastes and odors in drinking water. More severe results include the capability to affect respiratory, digestive, and circulatory symptoms under extensive exposure. Some people may experience dry and irritated skin and eyes after exposure to high concentrations of chlorinated water. Carbon media present in our Tier1 backwash system is a fantastic filtering media for reducing the presence of chlorine and its noticeable tastes and odors. Ensure you are getting the best tasting and filtered water available throughout your home with Tier1.

How Backwashing Filters Work

Backwashing is a process which reverses the flow of water to rinse and resettle the media of the tank to prevent channeling, retain the effectiveness of the media, and remove trapped contaminants. To begin the backwash process, water flow is reversed and sent down the riser tube which normally carries the filtered water out of the tank. The water entering the media tank actually lifts the media bed, swirling it and lifting contaminants trapped in the media upward, this water is then funneled out the drain line. This process of cleansing the filter media usually lasts for around 10 minutes. Following the backwash phase there is a rinse cycle which replicates the normal flow of water through the media, this rinses the media again and allows it to settle into its serviceable position. With the media resettled and cleansed, water filtration may resume.

"Channeling" Inefficiencies

Channeling is a process caused by a liquids natural tendency to follow the path of least resistance. Over time water will find a path it can flow the fastest through and will carve a path or channel following its flow. This process causes a lowered system effectiveness because water will begin to flow around the filter media instead of flowing through it as intended. To fight this process and remove suspended contaminants a backwash and rinse cycle will mix up the media and then resettle it, counteracting the channeling process and providing maximum contact between the water and filtering media.

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty1
Manufacturer's IdT1W-WH-CB-BW-1054
Actual Size (in)58-1/2 inches length) by 10 inches (outside diameter)
Actual Size (cm)147.96 x 25.4
System Sizinghomes with 4 or more bathrooms
Primary Filter MediaGranular Activated Carbon
Filter Life (gallons)1,000,000
Filter Life (Years)11
Flow Rate (gpm)7.2
Flow Rate (lpm)27.25
Fitting Size (inches)3/4 inch
Tank Dimensions10 inches x 54 inches
CertificationsNSF/ANSI Standard 42
Reduction ClassChlorine, Taste and Odor
Warranty GuaranteeTier1® Whole House Systems: Protect Every Drop Guarantee
Includes20 inch x 54 inch pre-filled resin tank, control valve, power cord and 3/4 inch and 1 inch fittings
Primary Filter MediaGranular Activated Carbon

Reduced Contaminants

The TIER1_T1W_WH_CB_BW_1054 reduces the following contaminants:

  • Chlorine Taste & Odor
  • Odor
  • Pesticides
  • Rust and Corrosion
  • Sand
  • Sediment
  • Silt
  • Turbidity

The TIER1_T1W_WH_CB_BW_1054 fits the following model numbers


Installation Guide