DGD-5005-20, 155358 Pentek Comparable Tier1 Spun Polypropylene Replacementer Filter Cartrdige Kit

SKU
TIER1_FHR_20_45_SEDIMENT_KIT
Price $26.99
Availability: In Stock
Fits most standard 20 x 4.5 inch housings.

Price as configured $26.99

  • Standard sized 20 x 4.5 inch replacement whole home spun polypropylene sediment filter
  • During filter replacement, we recommend disinfecting your housing by filling 1/3 with water and 1 tablespoon of bleach, scrub, then rinse thoroughly.
  • Centralizes home filtration needs to one location in home
  • Includes DGD-5005-20 Pentek Comparable Replacement Filter, O-ring, and Lubricant.
See more product details
Tier1 delivers on making your filter replacement experience easier with the DGD-5005-20, 155358 Pentek Comparable Tier1 Spun Polypropylene Filter Cartridge Replacement Kit. This complete filter exchange offer includes a replacement DGD-5005-20 Pentek Comparable spun polypropylene filter, a replacement O-ring, and a lubricant packet. By having these items prepared, there is no hassle in receiving all the parts necessary for your filter replacement. The 20 x 4.5 inch spun polypropylene filter replacement fits standard housings requiring a 20 x 4.5 inch filter and effectively reduces dirt, sediment, and rust and corrosion down to 5 microns in size. The replacement O-ring and lubricant can be used to created a new tight seal for your system to help prevent leaking. We advise replacing the O-ring every time you replace the filter, about every 6 months, in order to maintain optimal performance. Let Tier1 protect every drop.

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty 3
Used In Brands Tier1
Manufacturer's Id FHR-20-45-SEDIMENT
UPC 641945752359
Advertised Size (in) 20 x 4-1/2
Actual Size (in) 20 1/8 inches (length) x 4 1/2 inches (outside diameter)
Actual Size (cm) 51.1175 x 11.43
Primary Filter Media Polypropylene
Filter Life (months) 6 months
Micron Rating (Nominal) 5
Operating Temperature (°F) 40 - 145
Operating Temperature (°C) 4.4 - 62.8
Flow Rate (gpm) 20
Flow Rate (lpm) 75.7082
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes DGD-5005-20 Pentek Replacement Filter, O-ring, and Lubricant
Primary Filter Media Polypropylene

Reduced Contaminants

The TIER1_FHR_20_45_SEDIMENT_KIT reduces the following contaminants:

  • Dirt
  • Dust
  • Particulates
  • Rust and Corrosion
  • Sand
  • Sediment
  • Silt

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Discard used filter cartridge
  3. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  4. Insert new filter cartridge
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  7. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  8. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions