DGD-5005 Pentek Comparable Tier1 Spun Polypropylene Filter Replacement Kit

Price $18.99
Availability: In Stock
Fits housings requiring 10 x 4.5 inch filters

Price as configured $18.99

  • Functions as a stand alone filter or as a valuable pre-filter for a whole home system
  • Includes filter, O-ring and lubricant packet
  • Standard 10 x 4.5 inch replacement whole home spun polypropylene filter
  • Filters particles down to 5 microns in size!
See more product details
The DGD-5005 Pentek Comparable Tier1 Spun Polypropylene Filter Replacement Kit is Tier1's solution for easy whole house filter change maintenance. This convenient package combines all the necessary components to get your water filtration up and running. This offer includes a 10 x 4.5 inch Tier1 spun polypropylene filter replacement, a replacement O-ring, and a lubricant packet. The replacement O-ring and lubricant packet can be used to create a new tight seal with the filter housing to help prevent leaks. The spun polypropylene replacement filter effectively captures and reduces dirt, sediment, and rust and corrosion down to 5 microns. As a point of entry system you can ensure that the water running throughout your home is clean clear and better than ever. Let Tier1 protect every drop.

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty 3
Used In Brands Tier1
Manufacturer's Id FHR-10-45-SEDIMENT
UPC 641945752298
Advertised Size (in) 10 x 4-1/2
Actual Size (in) 9 3/4 inches (length) x 4 1/2 inches (outside diameter)
Actual Size (cm) 24.765 x 11.43
Primary Filter Media Polypropylene
Filter Life (months) 6 months
Micron Rating (Nominal) 5
Operating Temperature (°F) 40 - 145
Operating Temperature (°C) 4.4 - 62.8
Flow Rate (gpm) 10
Flow Rate (lpm) 37.8541
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes DGD-5005 Pentek Comparable Replacement Filter, O-ring, and Lubricant
Primary Filter Media Polypropylene

Reduced Contaminants

The TIER1_FHR_10_45_SEDIMENT_KIT reduces the following contaminants:

  • Dirt
  • Particulates
  • Sand
  • Sediment
  • Silt


  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Discard used filter cartridge
  3. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  4. Insert new filter cartridge
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  7. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  8. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions