R30-BB 155101-43 Pentek Comparable Tier1 Pleated Polyester Replacementer Filter Cartrdige Kit

Price $21.99

Availability: In stock

Fits housings requiring 10 x 4.5 inch filters

Price as configured $21.99

  • Pleated design ensures greater dirt holding capacity
  • Includes filter, O-ring and lubricant packet
  • Standard 10 x 4.5 inch replacement whole home pleated polyester filter
  • Filters particles down to 30 microns in size
See more product details
The R30-BB 155101-43 Pentek Comparable Tier1 Pleated Polyester Filter Cartridge Replacement Kit is Tier1's solution for easy whole house filter change maintenance. This convenient package combines all the necessary components to get your water filtration up and running. This offer includes a 10 x 4.5 inch Tier1 pleated polyester filter replacement, a replacement O-ring, and a lubricant packet. The replacement O-ring and lubricant packet can be used to create a new tight seal with the filter housing to help prevent leaks. The pleated polyester replacement filter effectively captures and reduces dirt, sand, and sediment down to 30 microns. As a point of entry system you can ensure that the water running throughout your home is clean clear and better than ever. Let Tier1 protect every drop.

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty 3
Used In Brands Tier1
Manufacturer's Id FHR-10-45-PLEATED
UPC 641945752281
Advertised Size (in) 10 x 4-1/2
Actual Size (in) 9 3/4 inches (length) x 4 1/2 inches (outside diameter)
Actual Size (cm) 24.765 x 11.43
Primary Filter Media Pleated Polyester
Filter Life (months) 6 months
Micron Rating (Nominal) 30
Operating Temperature (°F) 40 - 125
Operating Temperature (°C) 4.4 - 51.7
Flow Rate (gpm) 10
Flow Rate (lpm) 37.854
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes R30BB Pentek Comparable Replacement Filter, O-ring, and Lubricant
Primary Filter Media Pleated Polyester

Reduced Contaminants

The TIER1_FHR_10_45_PLEATED_KIT reduces the following contaminants:

  • Dirt
  • Particulates
  • Sand
  • Sediment
  • Silt


  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Discard used filter cartridge
  3. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  4. Insert new filter cartridge
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  7. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  8. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions