155548-43 Pentek Comparable Tier1 Carbon Replacementer Filter Cartrdige Kit

SKU
TIER1_FHR_10_45_CARBON_KIT
Price $28.99

Availability: In stock

Fits most standard 10 x 5 inch housings.

Price as configured $28.99

  • Includes EP-BB Pentek Comparable Replacement Filter, O-ring, and Lubricant.
  • During filter replacement, we recommend disinfecting your housing by filling 1/3 with water and 1 tablespoon of bleach, scrub, then rinse thoroughly.
  • Compares to the Pentek EP-BB 155548-43 sediment filter.
  • Actual filter size 9 1/2 inches (length) x 4 1/2 inches (outside diameter).
See more product details
Tier1 wants to make filter change as convenient as possible, so we are offering a filter installation kit that includes everything you need! The exclusive kit includes a 5 micron polypropylene EP-BB Pentek comparable filter, replacement O-ring and lubricant packet. For top performance, we recommend replacing your O-ring each time you change your filter, which is about every 6 months, depending on your water usage and local water quality.

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty 3
Used In Brands Tier1
Manufacturer's Id FHR-10-45-CARBON-KIT
UPC 641945752250
Advertised Size (in) 10 x 5
Actual Size (in) 9.5 inches (length) x 4.5 inches (outside diameter)
Actual Size (cm) 24.13 x 11.43
Primary Filter Media Activated Carbon Block
Filter Life (gallons) 1,500
Filter Life (liters) 5,678.12
Filter Life (months) 6 months
Micron Rating (Nominal) 5
Operating Temperature (°F) 40 - 180
Operating Temperature (°C) 4.4 - 82.2
Flow Rate (gpm) 2
Flow Rate (lpm) 7.57
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes EP-BB Pentek Comparable Replacement Filter, O-ring, and Lubricant
Primary Filter Media Activated Carbon Block

Contaminants

Reduces the following contaminants:

  • Bad Taste and Odor
  • Chlorine Taste & Odor
  • Odor
  • Rust and Corrosion
  • Sand
  • Sediment
  • Silt

The TIER1_FHR_10_45_CARBON_KIT is comparable with the following part numbers

EP5-BB EP5-10BB
EP510BB EP-BB
PENTEK-155548 EV910805
CG5-104 4PCD1
155548-43

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present).
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside.
  3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
  4. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
  5. Insert new filter cartridge.
  6. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
  7. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.

Reset Instructions