SPC-25-1030 Hydronix Comparable Tier1 Pleated Polyester Replacement Filter Cartridge Kit

SKU
TIER1_FHR_10_25_PLEATED_KIT
Price $11.99
Availability: In Stock
Fits housings requiring 10 x 2.5 inch filters

Price as configured $11.99

  • Convenient replacement kit offering includes filter, O-ring, and lubricant!
  • Reduces dirt, sand, and sediment down to 30 microns in size
  • Provides filtered water to every room of the home
  • Flow rate of up to 10 gallons per minute (gpm)
See more product details
The SPC-25-1030 Hydronix Comparable Tier1 Pleated Polyester Filter Cartridge Replacement Kit is a replacement 10 x 2.5 inch whole house Pleated polyester filter bundle with O-ring and lubricant. This combination offer allows for quick replacement of an existing filter while providing a new O-ring for a tight seal to help prevent leaking. The replacement pleated polyester filter reduces dirt, sand, and sediment down to 30 microns in size. With quick and easy installation you can count on this replacement kit getting your filter back up and running in no time. Let Tier1 filter your water and protect every drop.

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty 3
Used In Brands Tier1
Manufacturer's Id FHR-10-25-PLEATED
UPC 641945752250
Advertised Size (in) 10 x 2-1/2
Actual Size (in) 9 7/8 inches (length) x 2 1/2 inches (outside diameter)
Actual Size (cm) 25.0825 x 6.35
Primary Filter Media Pleated Polyester
Filter Life (months) 6 months
Micron Rating (Nominal) 30
Operating Temperature (°F) 40 - 125
Operating Temperature (°C) 4.4 - 51.7
Flow Rate (gpm) 10
Flow Rate (lpm) 37.854
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes SPC-25-1030 Hydronix Comparable Replacement Filter, O-ring, and Lubricant
Primary Filter Media Pleated Polyester

Reduced Contaminants

The TIER1_FHR_10_25_PLEATED_KIT reduces the following contaminants:

  • Dirt
  • Particulates
  • Sand
  • Sediment
  • Silt

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Discard used filter cartridge
  3. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  4. Insert new filter cartridge
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  7. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  8. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions