SDC-25-4010 Hydronix Comparable Tier1 Replacement Whole House Water Filter

SKU
TIER1-P10-40
Price $16.99
Availability: In Stock
Fits housings 40 inch by 2.5 inches
  • Certified by NSF standard 42 for material requirements
  • Provides greater dirt holding capabilities, versus string wound filters
  • Perfect solution for commercial type applications
  • Replace O-ring when replacing the filter every 6 months to help prevent leaking and optimize performance
See more product details
The SDC-25-4010 Hydronix Comparable Tier1 Whole House Sediment Water Filter is the ideal solution for sediment filtration. This spun wound polypropylene filter has a higher dirt holding capacity than traditional string wound filters and inhibits bacterial growth. As a 40 x 2.5 inch filter the SDC-25-4010 is perfect for commercial applications which call for dirt, sediment, and silt reduction filter capable of filtering contaminants down to 10 microns. Easy to install and replace this filter will centralize your water filtration needs and have your system back up and running quickly. Tier1 is ready to protect every drop.

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty 1
Used In Brands Hydronix, Tier1
Manufacturer's Id P10-40
UPC 799932614767
Advertised Size (in) 40 x 2-1/2
Actual Size (in) 40 inches (length) x 2-1/2 inches (outside diameter)
Actual Size (cm) 101.6 x 6.35
Media Spun Wound Polypropylene
Primary Filter Media Polypropylene
Filter Life (months) 6 months
Micron Rating (Nominal) 10
Operating Pressure (psi) 0 - 50
Maximum Operating Pressure (psi) 46.4
Operating Temperature (°F) 40 - 125
Operating Temperature (°C) 4.4 - 51.7
Color White
Certifications NSF/ANSI Standard 42
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Primary Filter Media Polypropylene

Reduced Contaminants

The TIER1-P10-40 reduces the following contaminants:

  • Dirt
  • Sand
  • Sediment
  • Silt

The TIER1-P10-40 is comparable with the following part numbers

HYDRONIX-SDC-25-4010
SDC-25-4010
TIER1-P10-40
P10-40

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside
  3. Discard used filter cartridge
  4. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
  5. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  6. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  7. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  8. Insert new filter cartridge
  9. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  10. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions