RPWF GE Comparable Tier1 Replacement Refrigerator Water Filter

SKU
TIER1-RWF1063
Price $37.99
Availability: In Stock
Fits refrigerator models that require the GE RPWF
  • Easy to install and replace, in just minutes
  • Activated Carbon Block reduces contaminants before they end up in your water and ice.
  • This filter is designed to fit in place of the GE RPWF, this filter will not work in place of the GE RPWFE
  • Tested and Certified by NSF International against NSF/ANSI 42 for materials and structural integrity
See more product details
The Tier1 RWF1063 refrigerator water filter is designed for refrigerator models requiring the GE RPWF filter. The activated carbon block media reduces chlorine taste and odor, sand, sediment, rust, and unsightly turbidity. To maintain filter performance, make sure to replace the RWF1063 every 6 months or so, depending on your local water quality and usage. The Tier1 RWF1063 installs in just 4 steps and ensures you serve the cleanest, best tasting water and ice.

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty 1
Used In Brands GE
Manufacturer's Id RWF1063
UPC 635510441915
Actual Size (in) 9-5/8 inches (length) x 1-3/4 inches (height) 1-3/4 inches (width)
Actual Size (cm) 24.4475 x 4.445 x 4.445
Primary Filter Media Activated Carbon Block
Filter Life (gallons) 200
Filter Life (liters) 757.08
Filter Life (months) 6 months
Operating Pressure (psi) 30 - 120
Operating Temperature (°F) 33 - 100
Operating Temperature (°C) 0.6 - 37.8
Flow Rate (gpm) 0.5
Flow Rate (lpm) 1.893
Color White
Certifications Independently Tested against NSF/ANSI Standard 42
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Primary Filter Media Activated Carbon Block

Reduced Contaminants

The TIER1-RWF1063 reduces the following contaminants:

  • Chlorine Taste & Odor
  • Rust and Corrosion
  • Sand
  • Sediment
  • Silt
  • Turbidity

The TIER1-RWF1063 is comparable with the following part numbers

GGD GFE27GSD GFE29H GFE29HSD
GGD GMD GNE26GSD HGD
HMD KGD KMD PFE29P
PFE27KSD PFE29PSD PWE23KSD PYE23KSD
PYE23PSD RPWF TIER1-RWF1063 WSG-4
WFC7201 WD-RPWF MPF15350 EWRF1026
PG-RPWF ZK-ZK-2763

The TIER1-RWF1063 fits the following model numbers

CFE28TSHSS CWE23SSHSS CYE22TSHSS CYE23TSDSS
GFE26GGHBB GFE26GGHWW GFE26GMHES GFE26GSHSS
GFE28HGHBB GFE28HGHWW GFE28HMHES GFE28HSHSS
GFE29HSDSS GNE29GGHBB GNE29GGHWW GNE29GMHES
GNE29GSHSS GYE22KMHES GYE22KSHSS PFE28RSHSS
PFE29PSDCSS PFE29PSDSS PWE23KGDBB PWE23KGDWW
PWE23KMDES PWE23KSDS PYE22PSHSS PYE23PSDSS

Installation Guide

Instructions

  1. Remove old cartridge by gently lifting the filter away from housing until first release, and then lift again to remove.
  2. Align top of new filter with cartridge holder and push until cartridge is fully seated.
  3. While continuing to ensure cartridge is fully seated in the holder, gently rotate the filter (inward for BF models and downward for SxS models) until it can no longer rotate.
  4. Run water from the dispenser (approximately 2 gallons or about 5 minutes) to clear any particles and remove air from the system.

Reset Instructions