X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

P5 Pentek Comparable Tier1 Replacement Whole House Water Filter

SKU
TIER1-P5-10
Price $5.99 List Price Price $8.99 Save 33%
Availability: In Stock
Fits most standard 10 x 2.5 inch housings.
  • Made of durable Spun Wound Bonded Polypropylene.
  • During filter replacement, we recommend disinfecting your housing by filling 1/3 with water and 1 tablespoon of bleach, scrub, then rinse thoroughly.
  • Compares to the Pentek P5-10 sediment filter.
  • Actual filter size 9 7/8 inches (length) x 2 1/2 inches (outside diameter).
See more product details
The P5 Pentek Comparable Tier1 Whole House Replacement Sediment Filter fits most standard 10 inch housings, and is ideal for basic sediment reduction in your home water system. This filter is designed to filter out contaminants down to 5 micron in size like dirt, rust, sand, sediment, and silt. This filtration gives you clean water, and keeps your pipes running smoothly and efficiently. For top performance, you should replace your Tier1 P5-10 about every 6 months depending on water usage and your local water quality.

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty1
Used In BrandsFulflo, Pentek, Tier1, Whirlpool
Manufacturer's IdP5-10
UPC799932624926
Advertised Size (in)10 x 2-1/2
Actual Size (in)9 7/8 inches (length) x 2 1/2 inches (outside diameter)
Actual Size (cm)25.0825 x 6.35
MediaSpun Wound Polypropylene
Primary Filter MediaPolypropylene
Filter Life (gallons)8,000
Filter Life (liters)30,283.3
Filter Life (months)6 months
Micron Rating (Nominal)5
Operating Temperature (°F)40 - 145
Operating Temperature (°C)4.4 - 62.8
Flow Rate (gpm)5
Flow Rate (lpm)18.927
ColorWhite
Warranty GuaranteeUnconditional Product Guarantee for Life of the Product
IncludesOne 10 X 2.5 Inch Spun Wound Polypropylene Replacement Filter by Tier1
Primary Filter MediaPolypropylene

Reduced Contaminants

The TIER1-P5-10 reduces the following contaminants:

  • Dirt
  • Rust and Corrosion
  • Sand
  • Sediment
  • Silt

The TIER1-P5-10 is comparable with the following part numbers

9547 9577 9591 9747
12461 13110 17367 45331
57820 173884 1019128 1227867
155014-131 155014-43 155014-52 529-286
55410-14 55410-15 55410-16 Ace 45331
American Plumber 155014 American Plumber W5P Ametek 583228 Ametek P5
AP110 Flotec RS3 FXUSC FXWPC
FXWSC FXWTC GE FXUSC GE FXWPC
GE FXWSC GE FXWTC GE GXWH01C GE GXWH04F
GE GXWH08C GE GXWH20F GXWH01C GXWH04F
GXWH08C GXWH20F HF-150 HF-160
HF-360 Honeywell RF-60 K00173 Kenmore 38480
Kleen Plus P5 Master Plumber 583328 P5 P5-D
Pentek P5 PS220410 Sears 34362 TIER1-P5-10
True Value 529-286 US Filter P5 W25P W34-PR
W5P W5P W5P478 WaterPik IR-20
WC34-PR WHCF-DWHV WHCF-GD05 Whirlpool WHKF-GD05
WHKF-DWHV WHKF-GD05 WVC34 AP3416588
P5-10 TIER1-P5-10

The TIER1-P5-10 fits the following model numbers

3G-STANDARD-34-PR10
150574
All 10 x 2.5 inch filter housings

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside
  3. Discard used filter cartridge
  4. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
  5. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  6. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  7. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  8. Insert new filter cartridge
  9. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  10. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation