IC10-14C Liquatec Comparable Tier1 Replacement Inline Water Filter

Price $7.99
Availability: In stock
Fits most point-of-use applications with 1/4 inch piping.
  • Inline filters do not require a housing, requiring very little installation steps, and no tools required
  • Filter provides great tasting water for up to 12 months depending on water quality and use
  • Filters contaminants down to 5 micron in size
  • This filter is universal to many 1/4 inch FNPT inline filters
See more product details
The Tier1 IN-WF0150 Coconut GAC inline water filter is perfect for your point-of-use applications such as RO systems, drinking fountains, water coolers, ice machines and refrigerators. The IN-WF0150 is design to remove sediment and chlorine taste and odor from your drinking water. The filter has a 1/4 inch FNPT (Female National Pipe Thread) connection, and easily installs into your POU system, and maintains a half a gallon per minute flow rate.

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty 1
Manufacturer's Id IN-WF0150
UPC 635510408451
Advertised Size (in) 10 x 2
Actual Size (in) 10 inches (length) x 2 inches (width) x 2 inches (height)
Media Coconut Shell Granular Activated Carbon
Primary Filter Media Granular Activated Carbon
Filter Life (gallons) 2,000
Filter Life (liters) 7,570.82
Filter Life (months) 12 months
Micron Rating (Nominal) 5
Maximum Operating Pressure (psi) 125
Operating Temperature (°F) 35 - 100
Operating Temperature (°C) 3.3 - 37.8
Flow Rate (gpm) 0.5
Flow Rate (lpm) 1.89
Fitting Type FNPT
Fitting Size (inches) 1/4 inch
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Primary Filter Media Granular Activated Carbon


Reduces the following contaminants:

  • Chlorine Taste & Odor
  • Particulates
  • Sediment

The TIER1-IN-WF0150 is comparable with the following part numbers



  1. Tier1 IN-WF0150 inline filters should be installed on cold water lines only
  2. Tier1 IN-WF0150 water filters should not be used where water is microbiologically unsafe
  3. Cartridges will contain a very small amount of carbon fines. After installation, cartridges should be flushed with sufficient water to remove all traces of fines from your water system before use
  4. It is recommended that you run the tap for at least 10 seconds prior to using the water (this is particularly important if the tap water has not been used daily)
  5. The filter must be protected against freezing. Failure to do so may result in cracking of the filter and water leakage

Reset Instructions