CT-S-1000 Tier1 Countertop Drinking Water Filter System
- Requires only 6 inches of counter space. Includes a TIER1-EP5-10 water filter.
- Fits standard 10 x 2.5 inch filter cartridges
- For cold water only, use diverter to switch from hot to cold water uses
- Make sure to flush and disassemble system when not in use for extended periods of time
Experience the Tier1 Difference
Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:
- Guaranteed Fit
- Guaranteed Quality
- Guaranteed Price
The Tier1 Countertop Drinking Water Filter System is the perfect system for those that may not have a lot of room in their kitchen. This system only requires 6 inches of counter space, so it will fit around almost any sink area. A countertop system has many different uses! You can fill up your reusable water bottle, fill up a pitcher to keep in the fridge, use to fill up your pets water bowl or just simply rinse your fruits and vegetables.
|Actual Size (in)||13 inches (height) x 6 inches (width) x 4 1/2 inches (depth)|
|Includes||Filter housing unit with spout, wrench, and pipe|
- Unscrew and remove your existing strainer/aerator from the end of your kitchen faucet (standard thread loosens to the left or counter clockwise).
- Screw diverter valve onto faucet, remove/add adapters as necessary. Visit your local plumbing store if the included fittings are not a fit on your faucet.
- After you complete the above steps, turn water ON and PULL the PIN on diverter valve to divert the water to the filter.
- The first use of your new filter may take a minute or two while the canister fills up with water before it passes through the cartridge and out the spigot.
- Allow water to run though the unit and out the filter spout for 2 to 3 minutes (first time only). This process allows for â€œloose carbon finesâ€ to be washed out.
- If leaking occurs from any point of the housing unit, it will need to be hand tightened at the point of leakage.
- The pin on the diverter valve is spring-loaded and will automatically return on its own when the water flow is terminated. (DO NOT PUSH PIN IN): This would weaken the spring and cause the pin to lose its mobility. When you turn your water back on, it will come through your faucet as normal again.