EV9270-72 Everpure Comparable Tier1 Food Service Replacement Filter Cartridge

SKU
TIER1-FS-1008
Price $33.99
Availability: In Stock
QL2, QL3, QLL7I (Single Head)
TIER1-FS-1008

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price


Limescale Inhibitor

The Tier1 FS-1008 helps inhibit the build up of limescale which could otherwise lead to lowered equipment efficiency or even costly system failure. Limescale is an off-white chalky substance that builds on the inside of pipes usually in connection with heating elements and heat transfer devices. By having a filter like the Tier1 FS-1008 the level of minerals that contribute to this build up are reduced and you can rest a little easier knowing that the efficacy of your machine is being protected.
Package Qty 1
Used In Brands Everpure
Manufacturer's Id FS-1008
UPC 635510439080
Actual Size (in) 12 inches (length) x 3-4/5 inches (diameter)
Actual Size (cm) 30.48 x 7.9375
Media Block GAC with Polyphosphate, KDF, and Scale Inhibitor
Primary Filter Media Granular Activated Carbon
Filter Life (gallons) 15,000
Filter Life (liters) 5,678
Filter Life (months) 6 months
Micron Rating (Nominal) 1
Operating Pressure (psi) 0 - 125
Operating Temperature (°F) 40 - 100
Operating Temperature (°C) 4.4 - 37.8
Flow Rate (gpm) 1.67
Flow Rate (lpm) 6.322
Certifications NSF/ANSI Standard 42
Primary Filter Media Granular Activated Carbon

Reduced Contaminants

The TIER1-FS-1008 reduces the following contaminants:

  • Bad Taste and Odor
  • Chlorine Taste & Odor
  • Sediment

The TIER1-FS-1008 is comparable with the following part numbers

EV9270-72
EV9270-71
ELF-1M-P-KDF

Instructions

  1. Shut off water supply
  2. Unlock and remove old filter cartridge
  3. Insert and lock new cartridge filter into head assembly
  4. Turn on water and check for leaks
  5. If leaks occur, repeat step 3
  6. Flush 5 gallons of water through new filter cartridge prior to use
  7. Install in cold water applications only
  8. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit
  9. Install in compliance of local and state regulations

Reset Instructions